Guar gum manufacturer & exporter · Jodhpur, India · Best price guaranteed +91 98287 95555info@enituxiaexports.com
Buying guide

Guar Gum Buying Guide: Grades, Mesh & Viscosity Explained

A practical guide for purchase and QC teams. Learn what the numbers on a guar gum specification mean, how to compare quotes fairly and what to check when a lot arrives.

By the Enituxia Exports Quality Team · Updated

1. What guar gum is

Guar gum is a natural polysaccharide (a galactomannan) taken from the endosperm of the guar seed, Cyamopsis tetragonoloba. It is sold as an off-white powder that thickens water. Its food additive code is E412 / INS 412, its CAS number is 9000-30-0, and India's export tariff code for treated and pulverised guar gum is 1302 32 30.

2. Grades

The same raw material is made into different grades by changing cleanliness, processing and testing:

  • Food grade - strict microbiological and purity limits.
  • Pharma grade - tested against IP, BP or USP monographs.
  • Industrial grade - wider limits on colour and microbiology, lower price.
  • Fast hydration (FHG) - for oilfield fluids, tested on Fann viscosity.

3. Mesh size

Mesh tells you how fine the powder is. "200 mesh, 95% passing" means at least 95% of the powder passes through a 200 mesh sieve (about 75 microns). Finer powder hydrates faster but can lump more easily if added carelessly. Common choices are 100 mesh for many industrial uses, 200 mesh for food, pharma and printing, and 300 mesh where very quick hydration is needed.

4. Viscosity

Viscosity is the most important number on a guar gum specification. For food, pharma and industrial grades it is usually measured on a 1% solution at 25°C with a Brookfield RVT viscometer, spindle 4, 20 rpm, after 2 hours (and sometimes 24 hours). Results are in centipoise (cps). Typical commercial ranges are 2,500 to 7,000 cps, with special grades up to about 9,000 cps.

Oilfield FHG is measured differently - on a Fann 35 viscometer, 0.48% guar in 2% KCl, at 300 rpm, read at 3 and 60 minutes, in cP. The two systems are not directly comparable, so always check the test method written on a quote.

Tip: ask the supplier to state the viscosity method on the quote and COA. A "5,000 cps" figure measured at 24 hours is not the same as 5,000 cps at 2 hours.

5. Other parameters

ParameterWhat it tells youTypical limit
MoistureWater content; high moisture means less gum per kg12% max. (7% for FHG)
ProteinLeftover germ; lower is purer5% max. (food grade)
Acid insoluble residue (AIR)Husk and insoluble impurities3% max.
AshMineral matter, sand1% max.
pHAcidity of the solution5.5 - 7.0
TPC, yeast & mouldMicrobial load for food/pharmae.g. 5,000 / 300 cfu/g max.

6. Comparing quotes fairly

Two quotes for "guar gum 200 mesh" can be for very different products. Before comparing price, line up the specifications:

  • Same grade (food / industrial / pharma / FHG)
  • Same mesh and percentage passing
  • Same viscosity range and the same test method and time
  • Same microbiological limits (for food and pharma)
  • Same packing, delivery terms (EXW / delivered / FOB / CIF) and payment terms

Then compare cost in use: if a cheaper powder has lower viscosity and needs a higher dose, it may cost you more per batch.

7. Checks when a lot arrives

  • Bag labels show product, grade, lot number and dates
  • COA matches the agreed specification
  • Powder colour and smell are normal; no lumps or damp patches
  • Viscosity test on a sample using the agreed method
  • Starch test with iodine if adulteration is suspected
  • Keep a retained sample from each lot

Ready to buy? See our guar gum powder grades or ask for a quote.

FAQs

Frequently asked questions

How do I test guar gum viscosity at my factory?

Make a 1% solution (e.g. 5 g guar in 495 ml water) with fast stirring, leave it for 2 hours at about 25°C, then read it on a Brookfield viscometer with spindle 4 at 20 rpm. Use the same method as your supplier so the numbers match.

Is cheaper guar gum always worse?

Not always, but compare cost in use. A powder with 25% lower viscosity can need more dosage, which cancels the saving. Ask for the viscosity on the COA and compare price per unit of performance.

How can I check guar gum for starch adulteration?

Add a few drops of iodine solution to a 1 in 10 guar solution. A blue colour shows starch is present; pure guar gum gives no blue colour.

Get today's best price in minutes

Message us on WhatsApp with the product, grade and quantity. We reply with price, specification sheet and sample option - usually the same day.

Contact us

Get the best price for your exact grade

Tell us the product, grade and quantity. You'll get a clear quote, specification sheet and free sample offer - straight from our Jodhpur team, with no middlemen.

  • Reply within 1 working day
  • Free samples
  • Price-match promise

Get today's best price

Fill in your details - we reply within one working day.

Your details are safe and used only to reply to you.

WhatsApp for Price
Chat for today's price